Activated Period - Vivotek SC8131 User Manual

VIVOTEK
You can click Restore to recall the original settings without incorporating the changes. When
completed with the settings on this page, click Save to enable the settings.
If you want to configure another sensor setting for day/night/schedule mode, please click Profile to
open the Profile of exposure settings page as shown below.
Activated period: Select the mode this profile to apply to: Day mode, Night mode, or Schedule
mode. Please manually enter a range of time if you choose Schedule mode. Then check Save to for
the configuration take effect.
Please follow the steps below to configure a profile:
1. Check Enable this profile.
2. Select the applied mode: Day mode, Night mode, or Schedule mode. Please manually enter a
range of time if you choose Schedule mode.
3. Configure Exposure control settings in the folowing columns. Please refer to previous dicussions
for detailed information.
4. Click Save to enable the setting and click Close to exit the page.
156 - User's Manual