Location; System > General Settings - Vivotek SC8131 User Manual

VIVOTEK
System > General settings
This section explains how to configure the basic settings for the Network Camera, such as the
host name and system time. It is composed of the following two columns: System, and System
Time. When finished with the settings on this page, click Save at the bottom of the page to
enable the settings.
System
Host name: Enter a desired name for the Network Camera. The text will be displayed at the top of the
main page, and also on the view cell of ST7501 and VAST management software.
Turn off the LED indicators: If you do not want others to notice the network camera is in operation, you
can select this option to turn off the LED indicators.

Location

Group_id; Device_id: These IDs are used to identify the individual cameras deployed at the same
installation site. For example, multiple stereo cameras can be installed in the same shop. You can identify
the owner of analytics reports, e.g., collected via an HTTP server, using their unique IDs.
User's Manual - 139