Vivotek SC8131 User Manual page 52

VIVOTEK
• Display elements: Click on the display button
indicators.
1. Show exclusive
2. Show start stop
by the camera.
3. Show object
4. Show object
5. Show objection duration of
the detection area. The number is useful for evaluating queueing and service time.
NOTE:
The start and end points of a moving object will only appear when the object eventually
disappears from the scene. If the object only lingers in the area, the start and end points
may not appear.
The counting only takes effect when a moving object is detected, then moves across the
detection line, and finally disappears from the area. The start stop map allows you to see
where tracking starts and ends so that you might adjust the detection zone.
52 - User's Manual
area: displays the exclusive areas, if configured.
map: displays the start and stop points of moving objects captured
ID: displays the sequential number assigned to moving objects.
height: displays the height of moving objects.
stay: displays the duration of stay of a moving object in
at the lower right to select the count