Passer-By Counting (4Th Type); To Configure The Passer-By Counting - Vivotek SC8131 User Manual

VIVOTEK

3-3-3. Passer-by Counting (4th type)

The configuration of Passer-by Counting is similar to the flowpath configuration as
previously described. An additional Passer-by Area is configurable if this counting mode is
selected.

To configure the Passer-by counting:

1. Enter a comprehensive name for the configuration, such as Queue_detect1.
rule type
2. Select the
3. Select the Sensitivity and other parameters.
4. Configure a flowpath at an entrance. Refer to previous section for details. Click and drag
the corner marks of the Passer-by Area to place it outside of an entrance.
Flowpath
78 - User's Manual
as "Passer-by Counting."
1 passer-by count
Passer-by area
Extend to cover the around-
the-corner traffic
Please ensure that all foot
traffic through the entrance can
be covered by the flowpath and
Passer-by area.
Note that a person must move
across a distance of at least
50cm in the Passer-by Area to
trigger a count.