Vivotek SC8131 User Manual page 23

7. Once the Stitching configuration is done, the positioning order of peer cameras will be
fixed, and you cannot change their Stitching order unless you unstitch them.
Consider the following when stitching multiple cameras to form a large virtual floor plan:
Height (cm)* Dist. to the next
camera
240 140.2
260 191.1
280 242.1
300 293.1
320 344.0
340 395.0
360 446.0
8. The maximum distance between cameras, when mounted at a height of 300cm, is
278cm (from edge to edge). The FOVs of two cameras must overlap to a certain amount
in order to cover people walking between them. An estimation of a man of 185cm tall is
applied here.
300cm
NOTE:
• The cameras here are shown on their long side.
• The FOV is the camera's "detecting area."
9. The tracked objects will appear on the live view of a stitched configuration after a
3-seconds delay, due to the network transfer and processing time.
10. It is best that all cameras in a Stitching configuration are installed at the same height
and with the same tilt angle (if applied).
Combined HFOV
395.0
522.4
598.9
700.8
802.7
904.7
* Unit in centimeter.
1006.6
278cm
293cm
Combined HFOV
VIVOTEK
User's Manual - 23