Vivotek SD7151 Quick Install Manual
Vivotek SD7151 Quick Install Manual

Vivotek SD7151 Quick Install Manual

18x zoom progressive scan ccd
Hide thumbs Also See for SD7151:

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Summary of Contents for Vivotek SD7151

  • Page 2: Warning Before Install

    Warning Before Install Power off the Network Camera Refer to your user's manual for the as soon as it is found smoking or operating temperature. smelt unusual. Contact your distributor when such cases happen. Do not touch the Network Camera Do not disassemble the Network when it's lightening.
  • Page 3: Package Contents

    Package Contents SD7151 Black cover / Dome cover Wall mount bracket Power adapter Alignment sticker O-ring and screws Quick installation guide RJ45 female/female coupler Warranty card Software CD EN-2...
  • Page 4: Physical Description

    Physical Description Inner view Status LED Reset button Lens Outer view General I/O terminal block Ethernet 10/100 RJ45 plug Audio out (green) Microphone in (pink) Power cord socket (black) Earth EN-3...
  • Page 5: Hardware Installation

    Hardware Installation Mounting the Network Camera 1. Attach the alignment sticker to the wall. 2. Drill four pilot holes into the wall. 3. Attach the black cover to the Network Camera using the supplied four black screws. 4. Fix the dome cover to the Network Camera and secure it by rotating it clockwise. 5.
  • Page 6: Network Deployment

    Network Deployment 1. If you have external devices such as sensors and alarms, make connection from general I/O terminal block. G N D : Ground D I 4 : Digital Input D I 3 : Digital Input 2. Use the supplied RJ45 female/female D I 2 : Digital Input D I 1 : Digital Input coupler to connect the Network Camera...
  • Page 7: Assigning Ip Address

    "Next" button to continue the program. Installation Wizard 2 3. The program will search the VIVOTEK Video Receivers, Video Servers or Network Cameras on the same LAN. 4. After searching, the main installer window will pop up. Click on the MAC that matches the one labeled on the side of the camera lens or S/N number on the label of carton to connect the Internet Explorer to the Network Camera.
  • Page 8: Ready To Use

    Ready to Use 1. Access to the Network Camera from the Internet. 2. Retrieve live video through web browsers or recording software. For further setup, please refer to user's manual on the software CD. EN-7...

Table of Contents