4
Disassembly/Assembly > Controller System > Removing the Main Motor (MF4870dn/MF4830d) > Procedure
Removing the Main Motor (MF4870dn/MF4830d)
■ Preparation
1) Remove the left cover
2)Remove the SADF unit and reader unit.
3)Remove the right cover
4)Remove the front cover unit.
5)Remove the upper cover.
■ Procedure
1) Remove the scanner cover[1]
• 2 screws(black TP)[2]
x2
4
Disassembly/Assembly > Controller System > Removing the Main Motor (MF4870dn/MF4830d) > Procedure
[2]
[1]
F-4-386
Caution:
When mounting the scanner cover, pass the shutter open/close lever [1] through the
hole [A] in the scanner cover.
Caution:
Ensure that the shutter open/close lever [1] can move vertically.
4-159
[A]
[1]
F-4-387
[1]
F-4-388
4-159