Canon imageCLASS MF4890dw Service Manual page 325

4
Disassembly/Assembly > Controller System > Removing the Drive Belt (L418S/L410/L190) > Procedure
Caution:
Assemble the drive gear in the order shown in the below picture.
[2] [1]
[1] Primary deceleration pulley [6] Gear coupling
[2] Timing belt [7] Feed deceleration gear
[3] Fixing ratchet gear [8] Compression spring
[4] Fixing transmission gear [9] Compression spring
[5] Cartridge transmission gear
[6] Gear coupling
[7] Feed deceleration gear
[8] Compression spring
[9] Compression spring
4 Disassembly/Assembly > Controller System > Removing the Drive Belt (L418S/L410/L190) > Procedure
[4] [8] [3]
[9]
[6]
[7]
[5]
F-4-664
Caution:
Align the drive cover [2] with the 14 shaft holes [1] to mount it.
[1]
[1]
4-249
[1]
[2]
F-4-665
4-249