Procedure; Removing The Copyboard Glass (L418S/L410/L190); Preparation - Canon imageCLASS MF4890dw Service Manual

4
Disassembly/Assembly > Document Exposure/Feeder System > Removing the Copyboard Glass (L418S/L410/L190) > Procedure
3)Install the spring to the protrusion[1] of the DADF pickup upper cover.
[1]
4)Turn the DADF pickup upper cover over to the back, and install the separation pad
cover[1].
[1]
[2]
5)Turn the DADF pickup upper cover over to the front, and push in the separation
[2]
pad unit[1].
[1]
4 Disassembly/Assembly > Document Exposure/Feeder System > Removing the Copyboard Glass (L418S/L410/L190) > Procedure
[3]
x2
[3]

Removing the Copyboard Glass (L418S/L410/L190)

■ Preparation

1) Remove the left cover.
2)Remove the DADF unit and reader unit
3)Remove the DADF unit.

■ Procedure

1)Remove the 4 screws(TP)[1]
[1]
x4
2)Remove the copyboard guide holder[1]
1 claw[2]
1 protrusions[3]
[2]
[1]
4-128
[1]
F-4-301
[3]
F-4-302
4-128
[1]