Canon imageCLASS MF4890dw Service Manual page 215

4
Disassembly/Assembly > Controller System > Removing the Main Motor (MF4890dw/MF4880dw) > Procedure
2)Disconnect the connectors[1], and remove the motor driver PCB[2]
• 2 claws[3]
• 1 hook[4]
x2
[1]
3)Free the harness from the harness guide[A] and [B], and remove the duplex relay PCB[1]
• 1 claw[2]
• 1 hook[3]
[A]
4 Disassembly/Assembly > Controller System > Removing the Main Motor (MF4890dw/MF4880dw) > Procedure
x2
[3]
[2]
[4]
F-4-326
[2] [1] [3]
[B]
F-4-327
4)Free the motor harness[1] from the harness guide[C].
5)Remove the motor guide[2]
• 1 screw[3]
• 1 hook[4]
[3]
[1]
6)Lower the tension unit[1], and remove the belt[2].
[2]
4-139
[C]
[4]
[2]
F-4-328
[1]
F-4-329
4-139