4
Disassembly/Assembly > Fixing System > Removing the Fixing Assembly (MF4820d) > Procedure
Note:
The below picture shows how to wind the harness.
4
Disassembly/Assembly > Fixing System > Removing the Fixing Assembly (MF4820d) > Procedure
Removing the Fixing Assembly (MF4820d)
■ Preparation
1)Remove the left cover
2)Remove the copyboard cover and reader unit
3)Remove the right cover
4)Remove the front cover unit
5)Remove the upper cover
6)Remove the duplex feed unit
7)Remove the main controller PCB
■ Procedure
1)Remove the main controller mounting plate[1]
• 1 screw(with washer)[2]
• 1 screw(black TP)[3]
F-4-807
x2
[1]
[3]
[2]
4-295
F-4-808
4-295