Canon imageCLASS MF4890dw Service Manual page 278

4
Disassembly/Assembly > Controller System > Removing the Engine Controller PCB(D530) > Procedure
2)Disconnect the terminal[1], free the harness[2] from the harness guide[A], and then put it
through the hole[B].
[A]
[2] [1]
Caution:
When connecting the terminal[1], be sure that the contact spring[2] is in contact with
it.
4 Disassembly/Assembly > Controller System > Removing the Engine Controller PCB(D530) > Procedure
[2] [B]
F-4-518
[1]
[2]
F-4-519
3)Remove the harness spring[1] from the hook[2], and free the harness[3] from the guide[A].
[1]
[2]
4)Remove the harness retaining spring[1], and free the harness from the guide[A].
• 2 flat cables[2]
• 6 connectors[3]
x8
[A]
[3]
4-202
[3]
[A]
F-4-520
[2] [3]
[1]
F-4-521
4-202