Removing The Fixing Assembly (D530); Preparation; Procedure - Canon imageCLASS MF4890dw Service Manual

4
Disassembly/Assembly > Fixing System > Removing the Fixing Assembly (D530) > Procedure
Caution:
When mounting the fixing harness, wrap the fixing harness [2] around the protruding
part [1] of the harness holder, pass it through the harness guide [A], and then mount
the connector [3].
[1]
[2]
[3]
Note:
The below picture shows how to wind the harness.
4 Disassembly/Assembly > Fixing System > Removing the Fixing Assembly (D530) > Procedure

Removing the Fixing Assembly (D530)

■ Preparation

1)Remove the left cover
2)Remove the DADF unit and reader unit
3)Remove the right cover
4)Remove the front cover unit
5)Remove the upper cover
6)Remove the duplex feed unit
7)Remove the main controller PCB

■ Procedure

[A] 1)Remove the main controller mounting plate[1]
• 1 screw(with washer)[2]
• 1 screw(black TP)[3]
F-4-818
x2
[1]
[3] [2]
4-298
F-4-819
4-298