Canon imageCLASS MF4890dw Service Manual page 340

4
Disassembly/Assembly > Controller System > Removing the Fixing Delivery/Paper Width Sensor PCB (L418S/L410/L190) > Procedure
5)Remove the harness[1] from the guide[A] and [B].
[B]
[1]
6)Remove the fixing delivery/paper width sensor PCB[1]
• 1 connector
• 2 claws[3]
[2]
x2
4 Disassembly/Assembly > Controller System > Removing the Fixing Delivery/Paper Width Sensor PCB (L418S/L410/L190) > Procedure
[1] [A]
F-4-707
[3] [1] [3]
F-4-708
Note:
The below picture shows how to wind the harness.
4-264
F-4-709
4-264