Canon imageCLASS MF4890dw Service Manual page 457

4
Disassembly/Assembly > Pickup And Feeding System > Removing the Pickup Unit (L418S/L410/L190) > Procedure
2)Disconnect the terminal[1], free the harness[2] from the harness guide[A], and then put it
through the hole[B].
[A]
[2] [1]
Caution:
When connecting the terminal[1], be sure that the contact spring[2] is in contact with
it.
4 Disassembly/Assembly > Pickup And Feeding System > Removing the Pickup Unit (L418S/L410/L190) > Procedure
[2] [B]
F-4-1039
[1]
[2]
F-4-1040
3)Remove the harness retaining spring[1] from the hook[2], and free the harness[3] from the
guide[A].
[1]
[2]
4)Remove the harness retaining spring[1] and 4 connectors[2].
x4
4-381
[3]
[A]
F-4-1041
[2] [1]
F-4-1042
4-381