Canon imageCLASS MF4890dw Service Manual page 367

4
Disassembly/Assembly > Fixing System > Removing the Fixing Assembly (MF4890dw/MF4880dw) > Procedure
9) Remove the shaft support [1] of the delivery roller.
[1]
10) Remove the fixing assembly [1].
• 3 screws [2]
[2] [1]
x3
4 Disassembly/Assembly > Fixing System > Removing the Fixing Assembly (MF4890dw/MF4880dw) > Procedure
F-4-792
[2]
F-4-793
Caution:
When mounting the fixing harness, wrap the fixing harness [2] around the protruding
part [1] of the harness holder, pass it through the harness guide [A], and then mount
the connector [3].
[1]
[2]
[3]
Note:
The below picture shows how to wind the harness.
4-291
[A]
F-4-795
4-291