Canon imageCLASS MF4890dw Service Manual page 380

4
Disassembly/Assembly > Fixing System > Removing the Fixing Assembly (MF4780w/MF4770n/MF4750/MF4730) > Procedure
10) Remove the fixing assembly [1].
• 3 screws [2]
[2] [1]
x3
Caution:
When mounting the fixing harness, wrap the fixing harness [2] around the protruding
part [1] of the harness holder, pass it through the harness guide [A], and then mount
the connector [3].
[1]
[2]
[3]
4 Disassembly/Assembly > Fixing System > Removing the Fixing Assembly (MF4780w/MF4770n/MF4750/MF4730) > Procedure
[2]
F-4-839
[A]
Note:
The below picture shows how to wind the harness.
4-304
F-4-841
4-304