Procedure; Preparation - Canon imageCLASS MF4890dw Service Manual

4
Disassembly/Assembly > Document Exposure/Feeder System > Removing the DADF Unit (L418S/L410/L190) > Procedure
Removing the DADF Unit (L418S/L410/L190)

■ Preparation

1) Remove the left cover.
2)Remove the DADF unit and reader unit

■ Procedure

1) Remove the connector cover[1] and plate[2] , and remove the harness from the guide[A].
• 4 claws[3]
Caution:
When placing the removed copyboard cover and reader unit on the desk, floor,
etc.,be careful not to get the flat cable and harnesses trapped under them.
[3] [1]
[3]
4 Disassembly/Assembly > Document Exposure/Feeder System > Removing the DADF Unit (L418S/L410/L190) > Procedure
Caution:
Be sure to hold the connector cover when removing it.
[3]
x4
[3]
[2]
[1]
4-117
[A]
[3]
4-117