Thermo Scientific Sorvall X Pro Series Instructions For Use Manual page 70

Proceed as follows to toggle between the auto-open and closed modes of the lid:
1. Tap the Settings icon
2. Tap the Controls button
The "Controls" screen appears.
3. Tap the Lid Auto Open menu and choose Yes to have the lid unlocked, or No to keep it closed (factory
default).
4. Tap the Save button to save the open/closed default setting for the lid.
A pop-up window appears, indicating that the setting has been successfully saved.
5. To confirm the changes, tap the OK button in the pop-up window that appears. Tapping the X icon
this window and exits without saving.
You will be returned to the "Controls" screen.
Compressor Off
The Compressor Off button opens the "Compressor Off" screen. On refrigerated centrifuges, this screen lets
you set an energy-saving timer that turns off the compressor after a selectable period of inactivity.
NOTICE This screen is not present on ventilated models.
The following options are available for the compressor inactivity timer:
Never (factory default): This option keeps the compressor running while the centrifuge is powered
ƒ
up, so you can tap the Pre-temp button on the Home screen and start pre-tempering of samples
instantaneously.
30min, 1hr, 4hrs, 8hrs: These options turn off the compressor automatically after the selected period of
ƒ
inactivity. When you tap the Pre-temp button on the "Home" screen, you save energy but you may have
to wait for the compressor to run up before the pre-tempering of your samples is started.
Proceed as follows to activate the inactivity timer for the compressor:
1. Tap the Settings icon
2. Tap the Controls button
The "Controls" screen appears.
3. Tap the Compressor Off button.
The "Compressor Off" screen below appears.
4. Choose an option.
5. Tap the Save button to save the new inactivity timer for the compressor.
A pop-up window appears, indicating that the timer for the compressor has been successfully set.
6. To confirm the changes, tap the OK button in the pop-up window that appears. Tapping the X icon
this window and exits without saving.
You will be returned to the "Controls" screen.
Scheduling
The Scheduling button takes you to the "Scheduling" screen, where you can set up the centrifuge to
automatically turn on and/or off at any time of the day once per day of the week.
You can set up one "Auto On" and "Auto Off" schedule and activate one or both right away, or keep one or both
disabled for later use.
Auto On Scheduling
1. Tap the Settings icon
2. Tap the Controls button
The "Controls" screen appears.
3. Tap the Scheduling button on the "Controls" screen.
The "Scheduling" screen appears.
If you have not configured any schedules yet, both the "Auto On" and "Auto Off" schedules will be disabled.
4. Tap the Edit button for the "Auto On" option to start setting up a schedule.
The "Edit Auto On" screen appears.
5. Tap on any day of the week—for example, M(onday).
6. Tap on AM or PM to select the period of the day
on the navigation bar.
on the "Settings" screen.
on the navigation bar.
on the "Settings" screen.
on the navigation bar.
on the "Settings" screen.
3-38
Graphical User Interface
closes
closes