Thermo Scientific Sorvall X Pro Series Instructions For Use Manual page 69

5. To confirm the changes, tap the OK button in the pop-up window that appears. Tapping the X icon
this window and exits without saving.
You will be returned to the "Controls" screen.
If you have chosen "Advanced Mode", a click-wheel with "Timed Run" options will now be added to the
screen that opens when you tap the Time box on the "Home" screen.
If you have reverted to "Standard Mode", there is no click-wheel with "Timed Run" options.
6. To further customize "Standard" or "Advanced Mode", please refer to the previous section
page 3-34.
View Time As
The View Time As button lets you choose whether you wish to have the counter in the time box of the "Home
"screen run up or down while the centrifuge is spinning. The options are:
Elapsed: Makes the timer run forward in continuous mode or up to the time setpoint in a timed run.
ƒ
Remaining: Makes the timer count down to zero from the time setpoint.
ƒ
Proceed as follows to toggle between count-up and count-down timer modes:
1. Tap the Settings icon
2. Tap the Controls button
The "Controls" screen appears.
3. Tap the View Time As menu and choose Elapsed to have the timer run forwards (factory default), or
Remaining to have it run backwards.
Tap the Save button to save the new timer mode.
4.
A pop-up window appears, indicating that the timer mode has been successfully changed.
5. To confirm the changes, tap the OK button in the pop-up window that appears. Tapping the X icon
this window and exits without saving.
You will be returned to the "Controls" screen.
Pulse Customization
The Pulse Customization button opens the "Pulse Customization" screen that lets you set the default behavior
for the Pulse button on the "Home" screen. The following options are available for customizing the Pulse
button:
Continuous (factory default): This option makes the centrifuge run continuously at the default speed (for
ƒ
instructions on presetting the default speed, please refer to the section
you stop it by tapping the Pulse button
Max speed: This option makes the centrifuge spin up to maximum speed and then stop.
ƒ
15sec, 30sec, 1min: These options delay the start of the time counter until maximum speed has been
ƒ
reached.
Proceed as follows to select the default behavior for the Pulse button
Tap the Settings icon
1.
Tap the Controls button
2.
The "Controls" screen appears.
3. Tap the Pulse Customization button.
The "Pulse Customization" screen appears.
4. Choose an option.
5. Tap the Save button to save the new mode for the Pulse button
A pop-up window appears, indicating that the Pulse button
6. To confirm the changes, tap the OK button in the pop-up window that appears. Tapping the X icon
this window and exits without saving.
You will be returned to the "Controls" screen.
Lid Auto Open
This menu lets you preset the lid of the centrifuge to remain closed or unlock automatically once the run is
complete. The drop-down list has two options only:
Yes: Lid will unlock automatically once the centrifugation run is complete.
ƒ
No: Lid will remain closed after the end of the centrifugation run.
ƒ
on the navigation bar.
on the "Settings" screen.
or Stop button
on the navigation bar.
on the "Settings" screen.
3-37
Graphical User Interface
"Setpoints" on page
on the "Home" screen.
:
.
has been successfully customized.
closes
"Setpoints" on
closes
3-34) until
closes