Foreword (Anchor) - 3M DBI-SALA RoofSafe Anchor User Instruction Manual

3M™ DBI-SALA

Foreword (Anchor)

Section 1.0
Thank you for purchasing a 3M™ DBI-SALA
The RoofSafe Anchor is designed to eliminate or substantially reduce the risk of a fall which would otherwise lead to injury
or death to operatives working at height. Therefore it is vitally important that it is installed, maintained and used correctly.
The Anchor has been designed as a roof top anchorage which will arrest a fall from height. Therefore consideration should
be given to the user's age, fitness and any physical or mental disorders they may have.
The personal protection equipment (PPE) which is selected will form an essential part of the system.
Installation of the Anchor should be conducted by a 3M Fall Protection certified Installer or competent persons trained
by 3M Fall Protection or 3M Fall Protection's representative and must be in accordance with 3M Fall Protection's technical
instructions and all prevailing national standards.
The manufacturer of the 3M DBI-SALA RoofSafe Anchor is 3M Fall Protection.
All users of the anchor, as well as those who manage its use and maintenance, should be familiar with the user checks,
limitations, precautions, operation and general requirements of the system. Users should be competent personnel who
have read and understood this manual and have been trained by an authorised trainer.
3M Fall Protection recommends that working at height should not be conducted by a lone operative for reasons of safety
and that proper consideration is given to rescue procedures in the event of a fall or accident.
This manual must be provided in the official language of the country in which the system is to be used.
On no account should children or pregnant women use a fall arrest or work restraint system.
Product Application
Form No: 5903917 Rev: D
RoofSafe Anchor and Cable System
®
RoofSafe Anchor.
®
3