3M DBI-SALA RoofSafe Anchor User Instruction Manual page 11

3M™ DBI-SALA
Pre-Use & In Use Checks
Section 6.0
6.4 Attaching to the Anchor
Access to the Anchor should be gained from a position of safety. If necessary the user should use other safety equipment, such as
a twintailed lanyard or access platform, to facilitate safe access to the safety system. The user should attach their fall protection
system (e.g. an energy absorbing lanyard) to the rear 'D' ring of the harness. This prevents the lanyard getting in the way during use.
Always ensure make compatible connection only.
Always ensure that the locking mechanism of the carabiner is properly closed before proceeding. If an additional delta link is used
make sure the nut is securely fastened.
Inspect the Anchor to ensuring that it
is secure and the attachment eye is free
to turn.
Form No: 5903917 Rev: D Form No: 5903917 Rev: D
RoofSafe Anchor and Cable System
®
01
Attach your carabiner and fall protection
system (e.g. an energy absorbing lanyard)
to the Anchor via the connection eye.
Ensure the carabiner is locked and secure.
02
You are now safely attached to the Anchor.
03
11