General Information; Declaration Of Conformity - M&C SP Series Instruction Manual

Head Office
M&C TechGroup Germany GmbH  Rehhecke 79  40885 Ratingen  Germany
Telephone: 02102 / 935 - 0
Fax: 02102 / 935 - 111
E - mail: info@mc-techgroup.com
www.mc-techgroup.com
1

GENERAL INFORMATION

The product described in this instruction manual has been built and tested in our production facility.
All M&C products are packed to be shipped safely. To ensure the safe operation and to maintain the
safe condition, all instructions and regulations stated in this instruction manual need to be followed.
This instruction manual includes all information regarding proper transportation, storage, installation,
operation and maintenance of this product by qualified personnel.
Follow all instructions and warnings closely. Read this manual carefully before commissioning and
operating the device. If you have any questions regarding the product or the application, please don't
hesitate to contact M&C or your M&C authorized distributor.
2

DECLARATION OF CONFORMITY

CE - Certification
The product described in this operating manual complies with the following EU directives:
ATEX-Directive
The product described in this manual is produced in accordance with the EU directive for devices and
protection systems for appropriate use in hazardous areas 2014/34/EU appendix II. The type of
protection depends on the variant of the probe (see table 1).
EMV-Instruction
The requirements of the EU directive 2014/30/EU "Electromagnetic compatibility" are met.
Low Voltage Directive
The requirement of the EU directive 2014/35/EU "Low Voltage Directive" are met.
The compliance with this EU directive has been examined according to DIN EN 61010.
RoHS Directive
The requirements of the RoHS2 ('Restriction of Hazardous Substances 2') directive 2011/65/EU and
its annexes are met.
Declaration of conformity
The EU Declaration of conformity can be downloaded from the M&C homepage or directly requested
from M&C.
www.mc-techgroup.com SP3110../SP3110V.. | 1.00.02 5