17.6 CLEANING OF THE PROBE
The gas sample probe must be inspected at suitable intervals in time. Dust layers of more than 5 mm
must be removed immediately. The dust deposits under the cover must also be removed.
To prevent static charging, the probe should always be cleaned with a moist
cloth.
Warning
18
SHUTDOWN
Before shutdown, i.e. switching off the heater, the probe should be flushed with a suitable inert gas to
prevent condensation of aggressive components of the process gas.
19
PROPER DISPOSAL OF THE DEVICE
At the end of the service life of our products, it is important to take care of the appropriate disposal of
obsolete electrical and non-electrical devices. To help protect our environment, follow the rules and
regulations of your country regarding recycling and waste management.
www.mc-techgroup.com
SP3110../SP3110V.. | 1.00.02
33