Balluff BML-S1H1 Series User Manual page 31

BML-S1H1/2-B/S6 _ C-M3 _ A-D0-KA _ _ , _ -S284
Absolute Magnetically Coded Position Measuring System
3
Construction and function (continued)
Measured value
max.
1
Start of
magnetic tape
Left
Start of
magnetic tape
Fig. 3-3: BML-S1H2-..., positioning and measuring range
1) Note the orientation of the master track label!
(Note: Bonded magnetic tape may not be removed, not even
partially.)
2) Magnetic tape is not included in the scope of delivery.
3) If the magnetic tape is to be shortened, the length of the
magnetic tape must exceed the measuring range by this
value. Only shorten magnetic tape on the "end of magnetic
tape" side (see Fig. 3-3). Observe the notes in the magnetic
tape user's guide!
8 english
20
2
Front
8
mastertrack
7
Active
measuring surface
Right
Rear
20
mastertrack
BML-M0_-A3_-A_-M0006-A
BML-M0_-A3_-A_-M0026-C
BML-M0_-A3_-A_-M0106-F
Active
measuring surface
Measuring range
2)
1)
BML-M0_-A3_-A_-M0008-A
BML-M0_-A3_-A_-M0028-C
Measuring range
3)
7±2
End of
magnetic
tape
3)
7±2
End of
magnetic
tape