Set Beeper Sound On/Off; Decimal Point Of Sd Card Setting - Lutron Electronics PM-9112SD Operation Manual

1) Use the " ▲ Button " ( 3-5, Fig. 1 ) or " ▼ Button "
( 3-6, Fig. 1 ) to select the upper text to "YES " or
"no ".
YES - Auto Power Off management will enable.
no - Auto Power Off management will disable.
2) After select the upper text to " YES " or " no ", press the
" Enter Button " ( 3-8, Fig. 1 ) will save the setting
function with default.

7-4 Set beeper sound ON/OFF

When the lower display show " bEEP "
1) Use the " ▲ Button " ( 3-5, Fig. 1 ) or " ▼ Button "
( 3-6, Fig. 1 ) to select the upper text to " YES " or
" no ".
YES - Meter's beep sound will be ON with default.
no - Meter's beep sound will be OFF with default.
2) After select the upper text to " YES " or " no ", press the
" Enter Button " ( 3-8, Fig. 1 ) will save the setting
function with default.

7-5 Decimal point of SD card setting

The numerical data structure of SD card is default used
the " . " as the decimal, for example "20.6" "1000.53" .
But in certain countries ( Europe ...) is used the " , " as
the decimal point, for example " 20,6 " "1000,53".
Under such situation, it should change the Decimal
character at first.
18