Set Beep Sound On/Off; Decimal Point Of Sd Card Setting - Lutron Electronics AM-4234SD Operation Manual

7-4 Set beeper sound ON/OFF
When the lower display show " bEEP "
1) Use the "
▲
( 3-7, Fig. 1 ) to select the upper value to " yES " or
" no ".
yES - Meter's beep sound will be ON with default.
no - Meter's beep sound will be OFF with default.
2) After select the upper text to " yES " or " no ", press the
" ENTER Button " ( 3-8, Fig. 1 ) will save the setting
function with default.

7-5 Decimal point of SD card setting

The numerical data structure of SD card is default used
the " . " as the decimal, for example "20.6" "1000.53" .
But in certain countries ( Europe ...) is used the " , " as
the decimal point, for example " 20,6 " "1000,53".
Under such situation, it should change the Decimal
character at first.
When the lower display show " dEC "
1) Use the "
▲
( 3-7, Fig. 1 ) to select the upper text to " USA " or
" Euro ".
USA - Use " . " as the Decimal point with default.
Euro - Use " , " as the Decimal point with default.
2) After select the upper text to " USA " or " Euro ",
press the " ENTER Button " ( 3-8, Fig. 1 ) will save the
setting function with default.
Button " ( 3-5, Fig. 1 ) or "
Button " ( 3-5, Fig. 1 ) or "
25
Button "
▼
Button "
▼