Table of Contents
Advertisement
Remark :
During execute the Manual Datalogger, it can use the "
Button " ( 3-5, Fig. 1) or "
set the measuring position ( 1 to 99, for example room 1
to room 99 ) to identify the measurement location , the
lower Display will show P x ( x = 1 to 99 ).
b. Finish the Datalogger
During execute the Datalogger function, press the " LOG
Button ( 3-8, Fig. 1 ) > 1.5 seconds continuously again will
finish the Datalooger function, the Position no. " PXX " will
be disappeared and finish the Datalogger function.
the " DATALOGGER " indication will be disappeared and finish
the Datalogger.
5-4 To check the time and sampling time information
During the normal measurement ( not execute the
Datalogger ), If press " Time " ( 3-7, Fig. 1 )
once , the LCD display will present the time
information of Year/Month/Date , Hour/Minute/Second
and the Sampling time information .
5-5 SD Card Data structure
1) When the first time, the SD card is used into the meter,
the SD card will generate a route :
PMA01
2) If the first time to execute the Datalogger,
under the route PMA01\, will generate a new
file name PMA01001.XLS.
After exist the Datalogger, then execute again,
the data will save to the PMA01001.XLS until
Data column reach to 30,000 columns, then
will generate a new file, for example PMA01002.XLS
▼
Button " ( 3-6, Fig. 1 ) to
12
▲
Advertisement
Table of Contents
