Set Beeper Sound On/Off - Lutron Electronics DW-6064 Operation Manual

3) LCD will show in " Auto " & " yes " , means ensure Auto
Power Off function, you can press " HOLD button " ( 3-4,
Fig. 1 ) once to change state to " no ", means Auto
Power Off function is turn OFF.
4) If the state is correct, you can press the " FUNCTION
button " ( 3-3, Fig. 1 ) for 3 seconds at least to save
your setting and return to measurement.
5) If none of the buttons are pressed within 5 seconds,
meter will return to measurement without change
anything.

5-2 Set beeper sound ON/OFF

1) Press the " POWER button " ( 3-2 , Fig.1) more than 1.5
seconds to Turn ON the meter.
2) Press the " FUNCTION button " ( 3-3, Fig. 1 ) for 3
seconds at least, will into ADVANCED SETTING.
3) LCD will show in " Auto " & " yes " , press the
" FUNCTION button " ( 3-3, Fig. 1 ) once again. LCD will
show in " bEEP " & " yes " , means ensure Beeper
function, you can press " HOLD button " ( 3-4, Fig. 1 )
once to change state to " no " , means Beeper function
is turn OFF.
4) If the state is correct, you can press the " FUNCTION
button " ( 3-3, Fig. 1 ) for 3 seconds at least to save
your setting and return to measurement.
5) if none of the buttons are pressed within 5 seconds,
meter will return to measurement without change
anything.
9