Removing The Seat Cover; Removing The Cover From The Headrest Flap; Removing The Cover From The Head Support; Removing The Cover From The Shoulder Part - Cybex Silver SOLUTION M-FIX User Manual

REMOVING THE SEAT COVER

The cover of the infant seat consists of four parts (Headrest flap, headrest, shoulder
e e
part cover, booster cover and/or seat surface cover). The four covers of the seat are
fitted into the cover attachment channels on the edge of the infant seat and are held
in position at several places by press-studs (see image).
h
Once all studs have been released, the single parts of the cover can be removed
from the cover attachment channels.
In order to put the covers back on the seat, proceed in the reversed order as
removing them.
WARNING! The child car seat must never be used without the cover.

REMOVING THE COVER FROM THE HEADREST FLAP

Pull the opening of the cover over the adjustment lever so that the cover does not get
jammed on the lever when pulling it up to remove it.

REMOVING THE COVER FROM THE HEAD SUPPORT

Release the two press-studs at each side of the rear of the shoulder area. Pull the
cover out of the cover attachment channel.

REMOVING THE COVER FROM THE SHOULDER PART

Pull the cover out of the cover attachment channel.
14