Activating The L.s.p; Adapting To Body Size; Removal Of The Cybex Solution M-Fix - Cybex Silver SOLUTION M-FIX User Manual

1
2
3
L.S.P.
e
h
y
10

ACTIVATING THE L.S.P.

The "Linear Side-impact Protection" system (L.S.P.) can be extended in two steps by
A pressing the L.S.P. button(s).Together with the initial position, this provides a total of
three different L.S.P. settings.
Note! Always activate the L.S.P. on the side of the seat facing the car door.
PRESS!
To push the L.S.P. back into the housing, press the L.S.P. button again and push the
L.S.P. back into the starting position.

ADAPTING TO BODY SIZE

• The seat can then be adjusted to your child's body simply by using the adjustable
• Adjust it so that there is space for two fingers between the lower edge of the
Note! Only an optimally adjusted headrest (e) can offer your child maximum
protection and comfort while ensuring that the diagonal belt can be fitted smoothly
(f). The height of the CYBEX SOLUTION M-FIX can be adjusted to one of twelve
positions.

REMOVAL OF THE CYBEX SOLUTION M-FIX

Perform the installation steps in the reverse order.
• Operate the adjustment lever (v) on the frame (d) of the CYBEX SOLUTION M-FIX
o
Note! By folding in the locking arms (o), you are not just protecting the vehicle seat
but also the locking arms of the ISOFIX Connect system from dirt and damage.
headrest (e). To do this, pull the adjustment level (h) upwards to unlock the
headrest (e).
headrest (e) and the shoulder of the child.
• Unlock the ISOFIX locking arms (o) on both sides by pushing the release
buttons (y) and pulling them back simultaneously.
• Pull the seat out of the ISOFIX guides (u).
• Rotate the locking arms (o) 180°.
and push the locking arms in as far as they will go.