Table of Contents
Advertisement
Chapter 7
Appendix 1
Datavideo usually releases new firmware containing new features or reported bug fixes from time to time.
Customers can either download the HS-2200 firmware as they wish or contact their local dealer or reseller
for assistance.
This section outlines the firmware upgrade process which should take approximately 10 minutes to
complete. The existing HS-2200 settings should persist through the firmware upgrade process, which
should not be interrupted once started as this could result in a non-responsive unit.
A working HS-2200 will require:
The latest firmware update file for the HS-2200. This can be obtained from your local Datavideo
office or dealer.
The HS-2200 Power Supply
The SEConfig Software
A Windows 7 Computer with Ethernet Port
An Ethernet Cable
To change the HS-2200 video standard:
1. Switch off the HS-2200 and shut down the Computer.
2. Connect the HS-2200 rear panel to the Windows 7 Computer using an Ethernet cable.
3. Turn on the Windows 7 Computer.
4. Unzip the firmware update folder to the Computer Desktop for easy access.
5. Double click the firmware update icon to launch the Flash Update Utility.
6. Check the supported devices list which should display HS-2200 and then click NEXT.
Appendices
Firmware Upgrade
37
Advertisement
Table of Contents
