Table of Contents
Advertisement
SDI Video Outputs
The five BNC output connectors are user defined SDI outputs. Each of these SDI outputs has the option
to be:
1. Program
2. Program logo free
3. Program logo & titles free
4. Preview
5. Aux1,2,3 or 4
6. Multi screen
Note: Please enter the HS-2200 MENU to set the OUTPUT SOURCE.
DC Input
Connect the supplied 12V 5A PSU to this 4pin XLR socket.
Pin 1 = GND ( - )
Pin 2 = NC
Pin 3 = NC
Pin 4 = VCC ( + )
Fast Start Switcher DIP Switch
For
Firmware
Upgrade, push both DIP switches up.
For Switcher Fast Start, push both DIP switchers down.
Service Port
This RJ45 Ethernet port is used for updating the HS-2200
firmware, or uploading logo image.
HDMI Multi-View Outputs
HS-2200 is capable of achieving multi-view monitoring by
connecting multi-view monitor to the HDMI port. The HDMI
output can be used for monitoring video and audio in a
number of different configurations.
The HDMI connectors are located on the rear panel.
Note: HDMI multi-view output format is 1080i.
10
Advertisement
Table of Contents
