Table of Contents
Advertisement
Set up the Countdown Settings
1. Select one channel of PRESET CH1~6
2. Press MENU key to enter ON PREVIEW SETTING to set up the COUNT DOWN SETTING.
3. Press ENTER key to save your setting, and then exit the MENU Mode.
4. Press TIMER key, and then select one channel of PROGRAM CH1~6 (same as step 1 channel setting).
FREEZE
Freeze the program source image or return to live video of the selected
program source.
T-Bar
This performs a manually controlled transition from the current program
source to the selected Preset source. The selected transition wipe or
dissolve will be used. When the T-Bar has travelled as far as it can go the
transition between sources is complete. The T-Bar has indicators next to it
which light when the transition is complete.
The T-Bar can be operated in one of two modes which are chosen by a menu
option.
TIMER
In some mixing or switching applications it is useful to have a countdown
timer. It could be that the input is a pre-recorded video clip and you need to
know when to be ready to switch away from it.
This countdown timer function is only seen in the status area of the HDMI
multi-view output to the right of the normal Clock function. The timer can
be selected for one input channel, several channels or all channels.
When the TIMER button is active and the user switches to a selected input
channel the countdown starts on the HDMI multi-view.
The value of the countdown, in minutes and seconds (MM:SS).
When the countdown reaches zero the user can then switch or transition to
another input channel. If the countdown reaches zero the switcher will not
automatically change to the selected Preset source.
Headphone Socket
¼" / 6.3mm Stereo Headphone Socket for conventional headphones.
17
Advertisement
Table of Contents
