Keyboard - Lenovo ThinkPad P15v Gen 1 User Manual

7. Install a new M.2 solid-state drive:
a. Align the contact edge of the new M.2 solid-state drive with the key in the slot. Then, carefully insert
the drive into the slot at an angle of about 20 degrees
downward 2 .
b. Install the screw to secure the M.2 solid-state drive
8. Turn over the computer and reinstall the nano-SIM-card tray.
9. Connect the ac power adapter and all disconnected cables to the computer.

Keyboard

Prerequisite
Before you start, read Generic Safety and Compliance Notices and print the following instructions.
Replacement procedure
Notes:
• You might be instructed to slide the keyboard frame forward or backward in some of the following steps.
In this case, ensure that you do not press or hold the keys while sliding the keyboard frame. Otherwise,
the keyboard frame cannot be moved.
• Your keyboard might look different from the illustrations in this topic.
1. Disable the built-in battery. See "Disable the built-in battery" on page 25.
2. Turn off the computer and disconnect the computer from ac power and all connected cables.
3. Loosen the screw that secures the keyboard.
32
ThinkPad P15v Gen 1 and T15p Gen 1 User Guide
1 and pivot the M.2 solid-state drive
3 .