Download Print this page

Replace A Cru; Base Cover Assembly - Lenovo ThinkPad P15v Gen 1 User Manual

Hide thumbs

Advertisement

Table of Contents
4. Select Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off
automatically. Wait three to five minutes to let the computer cool.

Replace a CRU

Follow the replacement procedure to replace a CRU.

Base cover assembly

Prerequisite
Before you start, read Generic Safety and Compliance Notices and print the following instructions.
Note: Do not remove the base cover assembly when your computer is connected to ac power. Otherwise,
there might be a risk of short circuits.
Replacement procedure
1. Disable the built-in battery. See "Disable the built-in battery" on page 25.
2. Turn off the computer and disconnect the computer from ac power and all connected cables. Then,
close the computer display.
3. Remove the nano-SIM-card tray if your computer comes with one.
4. Turn over the computer.
5. Loosen the screws that secure the base cover assembly and pry up the latches. Then, remove the base
cover assembly.
26
ThinkPad P15v Gen 1 and T15p Gen 1 User Guide

Advertisement

Table of Contents
loading

  Also See for Lenovo ThinkPad P15v Gen 1