SETUP TRACTOR PROFILE IN GARAGE | CRX + SC1 AUTOSTEERING | RAVEN
Measure and enter the height of the
antenna.
101
Select the 'Next' arrow.
Measure and enter the antenna offset (if the
antenne is not mounted in the center).
102
Select the 'Next' arrow.
Measure and enter the distance between the
rear axle and the antenna.
103
Select the 'Next' arrow.
Measure and enter the Hitch offset from the
center (if the hitch is not in the center of the
104
machine).
Select the 'Next' arrow.
PAGE 35/37 | Calibration manual | 016-8000-015EN | Rev. A1
EUROPE GENERIC