Advertisement
CALIBRATE SC1 | CRX + SC1 AUTOSTEERING | RAVEN EUROPE GENERIC
When the machine is in the correct place, the
triangle will turn green and it is possible to
press 'Calibrate'. Before pressing calibrate,
33
make sure the whole machine (including the
cab) is completely not moving, shaking or so.
Press 'Calibrate'.
The system is calibrating the Gyro.
34
Make sure the machine and the cabine are
standing still when calibrating is in progress!
Calibration of the Gyro has been completed.
35
Select the 'Next' arrow.
Setup the Disengage sensor. First step is to
36
select the Disengage sensor Type. Press the
box underneath the 'Disengage type'.
Raven Industries Inc.
PAGE 14/37 | Calibration manual | 016-8000-015EN | Rev. A1
Advertisement
