Patient Materials; Blinded And Unblinded – Remove G6 Pro; Sound And Vibration Prompts - Dexcom G6 Pro User Manual

Sound and Vibration Prompts

The smart device's beeps/vibrations tell your patient the sensor session
is ending in 30 minutes, has just ended, or the sensor failed and the
session stopped.
The initial notification is one vibration. If not confirmed in the app, the
app vibrates and beeps twice, 5 minutes apart.
Once a sensor session has expired, tell your patient to remove their
sensor and transmitter. After removing them, have your patient put
them in a resealable bag and return everything back to your office.

10.3 Patient Materials

Each part has a section for you to complete, telling your patient when
to remove the sensor and transmitter.
Your Unblinded CGM patient has both the app and their materials to
tell them when to remove the sensor. Your Blinded CGM patient only
has their printed materials. Make sure you fill out Section C so they
know when to remove the sensor.
10.4 Blinded and Unblinded – Remove G6 Pro
Removing the sensor and applicator is the same for both blinded and
unblinded patient. At the end of the sensor session, they simply peel
off the G6 Pro.
G6 Pro User Guide
Chapter 10: Blinded/Unblinded End of Sensor Session
76