Planet ISW-504PS User Manual page 39

If finish the Backup and work successfully, it will show a message that tells you it done. As shown in
Restore
The Industrial PoE Switch will restore to previous backup/saved configuration while the "Restore" button be pressed. And
please note that once the Restore button be pressed, Web interface will disconnected for a while. Reload the Web browser
to re-login the system.
Factory Reset
The Factory Reset button can reset the Industrial PoE Switch back to the factory default mode. Be aware that the entire
configuration will be reset, and the IP address of the Industrial PoE Switch will be set to "192.168.0.100".
Once the Factory Reset item is pressed, the screen in
Figure 4-13 Configuration backup successes screen
Figure 4-14 Configuration restore screen
Figure 4-15 Factory Reset screen
Figure 4-16
-39 -
appears.
User's Manual
Figure 4-13.