Led Indicators - Planet ISW-504PS User Manual

1.
2.

2.1.3 LED Indicators

System
LED
P1 Green
P2 Green
Fault Green
Per 10/100Base-TX Port
LED
LNK / ACT Green
Per 100Base-FX Port
LED
LNK/ ACT Green
Figure 2-2 Reset button of Industrial PoE Switch
Press the RESET button once. The Industrial PoE Switch will reboot automatically.
Press the RESET button for 5 seconds. The Industrial PoE Switch will back to the factory
default mode; the entire configuration will be erased.
Color
Indicate the power 1 has power.
ndicate the power 2 has power.
I
ndicate the either power 1 or power 2 has no power.
I
Color
Indicate
Light
established at 10 or 100Mbps.
ndicate that the Switch is actively sending or receiving
I
Blink
data over that port.
Color
Indicate the link through that port is successfully established
Light
at 10 or 100Mbps.
Indicate that the Switch is actively sending or receiving data
Blink
over that port.
Function
Function
the link through that port is successfully
Function
-14 -
User's Manual