Table of Contents
Advertisement
Remember to remove the Port 1 – Port 4 from VLAN 1 membership, since the Port 1 – Port 4 had been assigned to
VLAN 2 and VLAN 3.
It's import to remove the VLAN members from VLAN 1 configuration. Or the ports would become
overlap setting. ( About the overlapped VLAN configuration, see next VLAN configure sample)
3.
Assign PVID for each port:
Port-1 and Port-2: PVID=2
Port-3 and Port-4 : PVID=3
Port-5: PVID=1
4.
Enable VLAN Tag for specific ports
Link Type: Port-2 (VLAN-2) and Port-4 (VLAN-3) be set to "Tagged".
The Per Port VLAN configuration in
Figure 4-32 Assign VLAN 2 Group members screen
Figure 4-33
appears.
-58 -
User's Manual
Advertisement
Table of Contents
