Table of Contents
Advertisement
Tagged packet entering VLAN 2
While [PC-2] transmit a tagged packet with VLAN Tag=2 enters Port-2, [PC-1] will received the packet
4.
through Port-1.
While the packet leaves Port-1, it will be stripped away it tag becoming an untagged packet.
5.
Untagged packet entering VLAN 3
1.
While [PC-3] transmit an untagged packet enters Port-3, the switch will tag it with a VLAN Tag=3. [PC-4] will
received the packet through Port-4.
2.
While the packet leaves Port-4, it will keep as a tagged packet with VLAN Tag=3.
At this example, VLAN Group 1 just set as default VLAN, but only focus on VLAN 2 and VLAN 3
traffic flow
Setup steps
1.
Create VLAN Group
Set VLAN Group 1 = default-VLAN with VID (VLAN ID)=1
Add two VLANs – VLAN 2 and VLAN 3
VLAN Group 2 with VID=2
VLAN Group 3 with VID=3
2.
Assign VLAN Member :
VLAN 2 : Port-1and Port-2
VLAN 3 : Port-3 and Port-4
VLAN 1 : Port 5
-57 -
User's Manual
Advertisement
Table of Contents
