Connecting External Devices; Connecting External Monitor - JVC GY-HM660U/GY-HM660E Basic Instructions

Connecting External
Monitor
To output live or playback video images and
0
audio sound to an external monitor, select the
output signals from the camera recorder, and
connect using an appropriate cable according to
the monitor to be used.
Choose the most suitable terminal according to
0
the monitor in use.
[HD/SD SDI] terminal:
0
Outputs either the HD-SDI signal or SD-SDI
signal.
[AV] terminal:
0
Outputs composite video and audio signals.
[HDMI] terminal:
0
Outputs HDMI signals.
Configure the settings in the [A/V Set] menu to
match the monitor to be connected.
Memo :
When [Network] is set to "On(HDMI Off)" or
0
"On(SDI Off)", either HDMI signal or SDI signal
is output. a
If the [HD/SD SDI] terminal or [HDMI] terminal is
0
connected, configure the settings in the [A/V
Set] menu according to the monitor to be
connected.
Audio (Lch)
Video
GND
Audio (Rch)
AV input
.
DEVICE
AV
REMOTE
HOST
DC
SDI IN
HDMI
* Select the output signal in [A/V Set] B [HDMI/SDI
Out].
* When [Record Format] B [System] is set to "SD",
only SD-SDI signals are output.
* To display the menu screen or display screen on
an external monitor, set [A/V Set] B [Video Set]
B [Display On TV] to "On".
Connecting via SDI
Digital video signals, together with embedded
0
(superimposed) audio signals and time code
signals, are output for both the HD-SDI and SD-
SDI signals.
User's bit output from the [HD/SD SDI] output
0
terminal is used as a flag to determine valid
video signals. Therefore, accurate values will
not be output.
Memo :
The sampling frequency for embedded
0
(superimposed) audio signals is 48 kHz. Time
code of the built-in time generator as well as
playback time code are also output.
Setting the Aspect
For setting the mode to convert images with a
0
16:9 aspect ratio to display on a 4:3 aspect ratio
screen.
Set using [A/V Set] B [Video Set] B [SD
0
Aspect].
The available modes include "Side Cut", "Letter"
0
(blackened at the top and bottom), and
"Squeeze" (full size, compressed at the left and
right).
Memo :
When [Record Format] B [System] is set to "SD",
0
and [SD Aspect] is set to "4:3", this item cannot be
selected.
23