Table of Contents
Advertisement
Connecting External
Monitor
To output live or playback video images and
0
audio sound to an external monitor, select the
output signals from the camera recorder, and
connect using an appropriate cable according to
the monitor to be used.
Choose the most suitable terminal according to
0
the monitor in use.
[SDI OUT] terminal:
0
Outputs either the 3G-SDI/HD-SDI signal or SD-
SDI signal.
[AV] terminal:
0
Outputs composite video and audio signals.
[HDMI] terminal:
0
Outputs HDMI signals.
Memo :
If the [SDI OUT] terminal or [HDMI] terminal is
0
connected, configure the settings in the [A/V Set]
menu according to the monitor to be connected.
If you are connecting with an output signal at 4K
0
(2160p), use an HDMI 1.4a compatible HDMI cable.
Audio (Lch)
Video
GND
Audio (Rch)
AV input
.
24
Connecting External Monitor
SDI IN
HDMI
* Select the output signal in [A/V Set] B
[HDMI/SDI Out].
* When [Record Format] B [System] is set to "SD",
only SD-SDI signals are output.
* To display the menu screen or display screen on
an external monitor, set [A/V Set] B [Video
Set] B [Display On TV] to "On".
Connecting via SDI
Digital video signals, together with embedded
0
(superimposed) audio signals and time code
signals, are output for both the 3G-SDI/HD-SDI
and SD-SDI signals.
Memo :
The sampling frequency for embedded
0
(superimposed) audio signals is 48 kHz. Time
code of the built-in time generator as well as
playback time code are also output.
Setting the Aspect
For setting the mode to convert images with a
0
16:9 aspect ratio to display on a 4:3 aspect ratio
screen.
Set using [A/V Set] B [Video Set] B [SD
0
Aspect].
The available modes include "Letter"
0
(blackened at the top and bottom) and
"Squeeze" (full size, compressed at the left and
right).
Memo :
When [Record Format] B [System] is set to "SD",
0
and [SD Aspect] is set to "4:3", this item cannot be
selected.
Advertisement
Table of Contents
