Table of Contents
Advertisement
BHL Freewheeling Trim Retrofit
8200 Series
Installation Instructions
3
Assembly (cont .)
d
Assemble Outside Adapter Plate and Rose
• Insert two (2) mounting posts into adapter plate. (Figure 6)
• Install rose using four (4) security torx screws.
Note:
Tighten screws evenly.
(4) Security
Torx Screws
4
Installation
a
Install Adapter Clutch
Install adapter clutch into
mortise lock hub. (Figure 7)
Note:
Adapter clutch is oriented toward
latchbolt as shown.
b
Install Outside Lever Assembly
Use outside bushing and spindle to connect rose/adapter plate assembly to outside lever
assembly. (Figure 8)
1-800-727-5477 • www.sargentlock.com
Copyright © 2019, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or
in part without the express written permission of SARGENT Manufacturing Company is prohibited.
Adapter and Plate Assembly
with Mounting Posts
Rose Assembly
Outside Lever Assembly
Align rose screw with gap in spring cartridge
LH/LHR Outside Shown
Figure 6
81-0794
Adapter Clutch
Figure 7
Apply grease to
these surfaces
Figure 8
5
RH/RHR Outside Shown
81-0790 Spindle
Bushing
(Outside)
Rose/Adapter Plate Assembly
A8259A 07/19
Advertisement
Table of Contents
