TL3700 Series
Designer Trim
Installation Instructions
1
Full-Trim (TL3710 & 3720) & Half-Trim (TL3780) Installation (cont .)
e
Install Adapter Plates (All)
• Install adapter plates on both sides of door using 3/8" Flat Head Screws.
• Install outside privacy plate and adapter plate.
Outside of Door
f
Install Half-trim Adapter Plate (TL3780 Only)
Install Half-trim adapter plate on non-trim side of door.
g
Thread Collar (TL3710 & 3720)
Thread collar onto both sides of door using supplied rubber grip.
Note
Make sure collar is tight up against door
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2011, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Figure 5
Figure 6
5
Figure 7
FM341 07/19