Switching Off Bluetooth - Otto Bock Genium 3B1-3 User Instructions

User Instructions

Switching off Bluetooth

•
The Bluetooth
default
• For safety reasons, the knee joint has to be made "visible" when
connecting for the first time
You have to either...
•
After the initial connection (pairing) with the app, this procedure is
no longer necessary
•
If no connection to the app occurs within the time frame of 2
minutes, the knee joint is not "visible" anymore and Bluetooth has
to be made visible again
•
If desired, Bluetooth can be deactivated in the app by the user
®
module of the Genium/X3 is always activated by
- Turn the prosthesis upside down 180° OR
- Put on and remove the charger
→
A 2 minute time frame to connect with the device is available
®
User instructions | Genium 3B1-3 | Academy | 02.11.2018 | © Ottobock 24