Maintenance - Optical Systems Design OSD2251EP Series Operator's Manual

OPTICAL SYSTEMS DESIGN
 U
M
AINTENANCE PLOAD
Use this section to upload OSD released update software.
Click the button and navigate to the folder where the software is saved then select the file.
Click the button to start the upload process.
After the software has been updated, the unit will restart.
It is advised to check that the unit has the uploaded software installed correctly by selecting Monitor 
System Info. Check the Software ID and the Build Time (date and time of upload) is correct.
Buttons
: Browse file location
: Upload software
DOC ID: 10119201
PAGE 59
OSD2251EP OPERATOR MANUAL