Optical Systems Design OSD2251EP Series Operator's Manual page 32

OPTICAL SYSTEMS DESIGN
FLOAT BACKUP DISABLE - <fbd>
FIGURE 29: FLOAT BACKUP DISABLED 1
No: 4 – Lists number of units connected (in this case 1,2,3,4)
MAC_ADDRESS:– Displaying all the MAC addresses of the units connected on the ring/bus
FLOAT_BACKUP: Disable – Displays all the units connected to the ring/bus having Float Backup
disabled.
SETTING_RESULT: OK – Displays the Float Backup disable has been successfully implemented.
<-local: This points to the unit that the USB cable is plugged into on the ring/bus.
The link furthest from the Master unit in a ring configuration is automatically selected as the backup
branch. In the case of even units on a ring the fiber link on port 3 will always be the backup branch –
indicated by a dashed line on a ring topology.
DOC ID: 10119201
PAGE 32
OSD2251EP OPERATOR MANUAL